PDA

View Full Version : d16z6??

fastcivic32
09-17-2003, 06:39 PM
i have a 96 civic ex and i blew it up for the second time, i came across a d16z6, and i was wondering if i can swap that in instead of using the d16y8 i kno ill have to change the ecu and everything
Honda4VW
09-17-2003, 06:52 PM
Yes, you can use it
fastcivic32
09-17-2003, 07:08 PM
how hard will the wiring be??
All Show
09-17-2003, 07:25 PM
If you use the Z6 engine harness if all you need is a P28 ECU. If you use your Y8 harness you will need a conversion harness and the P28.
Anonymous
09-19-2003, 08:51 PM
wow,whos the chick,I would like to lick the butt!!
Anonymous
09-19-2003, 11:30 PM
use the y8 intake and exh mani, dizzy. that way you dont need to swap ecu or harness. there are a few sensors u need to swap over but nothing major. anyways the y8 manis flow better than the z6.
fastcivic32
09-19-2003, 11:49 PM
does it matter if the y8 harness is from a automatic? cause the car is gonna be 5speed
All Show
09-20-2003, 01:07 PM
Above I wrote
If you use the Z6 engine harness if all you need is a P28 ECU. If you use your Y8 harness you will need a conversion harness and the P28.
Well think I was wrong. You can't use the z6 engine harness because the Z6 engine harness plugs into the chassis harness and then to the ECU. The Y8 engine harness goes direct to the ecu. You need to use the Y8 harness with a conversion harness for the ECU. I think that is right?