PDA

View Full Version : Stock S/C pulley "upgrades"?

Tiamat
11-09-2003, 06:34 AM
Are there any stock civic D-series crank pulleys that will either give me more boost, or just weigh less. I currently have a 99 DX with the JR pulley at 6psi. I don't have power steering or A/C so more than half of the pulley weight is wasted.
I know for B-series one could use a CRV pulley. Do we have anything like that?
Honda4VW
11-09-2003, 06:53 AM
Get a pulley out of a dx, no power steering or ac options in that model I believe
Tiamat
11-09-2003, 09:42 AM
Which gen? Cause I HAVE a 6gen DX and my stock pulley has A/C and P/S "grooves".
My car came with P/S, I just removed it.
Bizzar
11-09-2003, 08:07 PM
The CRV crank pulley will bolt up and is a larger diameter.
Larger crank pulley = more boost
Smaller SC pulley = more boost
dester223
11-09-2003, 08:54 PM
The CRV crank pulley will bolt up and is a larger diameter.
Larger crank pulley = more boost
Smaller SC pulley = more boost

You sure about that?
Tiamat
11-10-2003, 04:27 AM
A B-series crank pulley will bolt onto my D-series engine?
If that's the case I could also buy an unortodox racing lightened crank pulley for a civic si with just the alt. "groove".
But...
A B-series crank pulley will bolt onto my D-series engine?
Goldenboy
11-10-2003, 10:11 AM
I was told that you can use a crank pulley from a ZC? Haven't tried it though
R0Y
12-03-2003, 06:52 PM
.... so can anybody confirm which crank pulley to put on to increase the boost?....
Tiamat
12-03-2003, 09:23 PM
As far as I can tell, for a G6 civic, only Jackson racing makes an upgrade pulley.
R0Y
01-14-2004, 04:45 AM
does anyone know if there are size differences on the D-series crank pulleys? I mean from D15, D16 to D17??