PDA

View Full Version : 95 Si Tranny ???

jinx-mitchell
10-28-2003, 12:22 PM
I was wondering if I could take a 95 Si tranny and replace the aluminum shift fork with a steel fork from a 6th gen. Do 97 DX trannies have the steel shift fork? If so, could I put it in a 95 Si tranny? Thanks
Bizzar
10-28-2003, 12:33 PM
Yes and no...the 5th gear shift fork is the only one that will fit as far as I know.
liam821
11-02-2003, 04:50 PM
I was wondering if I could take a 95 Si tranny and replace the aluminum shift fork with a steel fork from a 6th gen. Do 97 DX trannies have the steel shift fork? If so, could I put it in a 95 Si tranny? Thanks

No you cant do that. The 96+ steel forks have three bars that go the forks in place. THe 92-95 have two.

93 SI (broke) shift forks. Notice the two steel rods? the 96+ have three
http://liam821.com/pix/car/06-16-01/DSC00123.JPG

liam
jinx-mitchell
11-03-2003, 11:32 AM
too bad. So if I want the gearing like a 95 Si, I just have to deal with aluminum shift fork huh?
Bizzar
11-03-2003, 02:15 PM
No...you can get a 96+ Y8 trans...same gearing, steel forks.
liam821
11-04-2003, 12:11 AM
No...you can get a 96+ Y8 trans...same gearing, steel forks.

Well...the y8 has a different 5th gear. Y8 5th is longer then a 92-95 SI...but other then that its the same. 5th gear really doesnt matter.

liam