PDA

View Full Version : Hydro guts in a cable?


Wleach11
08-16-2004, 07:43 PM
CAn I pull the guts out of my 95 EX tranny with a broken fork and put them in a 91 DX 5 speed case?

transzex
08-17-2004, 02:24 AM
in short, NO!!!!!!!!!!!

Only I know why.

fast88
08-17-2004, 09:29 AM
in short, NO!!!!!!!!!!!

Only I know why.
Dude what's your problem? Are you always a dick or what?


The actual reason is because the counter shaft(pinion) is too long on the hydro trans. and the 3-4 gears are in opposite positions.

Honda4VW
08-17-2004, 09:43 AM
The actual reason is because the counter shaft(pinion) is too long on the hydro trans. and the 3-4 gears are in opposite positions.

If that is true, then Transzex=:0wnage:

transzex
08-17-2004, 01:39 PM
Dude what's your problem? Are you always a dick or what?


The actual reason is because the counter shaft(pinion) is too long on the hydro trans. and the 3-4 gears are in opposite positions.
Just how much is the difference???????

3 or 6mm???????

What about the input shaft?????

They are different lenghts also.

Remember, I figured this out 4-5 years ago.

Mista Bone

fast88
08-17-2004, 02:57 PM
Just how much is the difference???????

3 or 6mm???????

What about the input shaft?????

They are different lenghts also.

Remember, I figured this out 4-5 years ago.

Mista Bone
Your right and yes the main shaft is different also. I don't know the difference in length. Since it didn't fit in my application I sold the tranny and moved on...per your instructions.

If your going to proclaim yourself to be the tranny expert on an online forum, you shouldn't have attitude that people ask you questions. Verbally berating, belittling, or being terse doesn't make anyone feel welcomed. I/we all appreciate that your willing to share your knowledge. But if it means I have to bow, grovel and beg for it, forget it.

transzex
08-17-2004, 11:26 PM
Ever get tired of answering the same question 100 times???????

In short, YES!!!!!!!!!!!

90zcrx
08-18-2004, 07:29 AM
Just how much is the difference???????

3 or 6mm???????

What about the input shaft?????

They are different lenghts also.

Remember, I figured this out 4-5 years ago.

Mista Bone
The input shaft is 3mm longer...nobody came on this thread to be quized

Ever get tired of answering the same question 100 times???????

In short, YES!!!!!!!!!!!
It's been asked twice.


You'd think that somebody that knows so much would be a lil more mature about answering a question. I've been reading this forum for a LONG time and your the main one that almost always has a bullshit responce that doesn't help the person's situation...sad, it's time to grow up...if you've answered it before, no fuckin big deal...don't be an asshole. Plain and simple