PDA

View Full Version : zc tranny with usdm differential

4thGEN
08-13-2004, 06:53 PM
which axles would i need if i had a zc tranny with a usdm differential? would i still need the half shaft?
4thGEN
08-14-2004, 05:46 PM
can anybody help me out here????? por favor?!
Kwicko
08-17-2004, 07:23 AM
ZC transmission with USDM diff uses USDM axles. No need for the intermediate shaft or for any Integra/Accord/hybrid/oddball axles.

I'm running a USDM Si transmission housing (in my '91 CRX DX) with ZC 1-4 gears, HF 5th gear, and Si final drive and diff. It uses stock DX/Si axles, and works like a charm.

Mike
4thGEN
08-17-2004, 11:01 AM
so if i had that zc tranny with the usdm differential, (91 hatch) which axles would i need?
fast88
08-17-2004, 11:06 AM
you would use the axles from a USDM trans. i.e. a 91 hatch or CRX
4thGEN
08-17-2004, 12:22 PM
awesome, thanks.
Kwicko
08-18-2004, 02:01 PM
You need to make sure and get the USDM *axle seals*, too - where the axles go into the transmission housing. The ZC uses a larger opening on the driver's side, so with the stock seal in there, all your tranny oil will leak out if you use a USDM diff and axle! Easy as hell to change, and only costs you about $5 at the dealer.

Mike