FlyinRyan's D16z6 Drag car build. TUNED. #'s pg11
Figured I'd post some pics of my car, and a bit about my build. I've been on DSO for many years, just read more than anything. SO finally, here's my car. 1992 cx hatchback.
Here was the car back in 08, after getting in back together after it had been stolen and stripped in 07.
First turbo set-up.
I took the car apart in april 09 to get moving on an engine build i had been working on. And it's sat since. Slowly being built. BUT I have just about everything needed to get the car on the dyno at the first of the new year
Sooo, some specs.
Engine.
-GoldenEagle sleeved and o-ringed d16z6 block.
-Wiseco pistons and eagle rods
-Honda OEM bearings
-Bottom end assembled by Cortney Green
-Port and polished Cyl head
-Crower springs and retainers.
-Comp 59300 cam
-ARP head studs
-OEM honda head gasket.
-GoldenEagle intake mani
-GE Fuel rail
-Omni Power 70mm TB
-FuelLab FPR
-Intank walbro255
-Inline Bosch 044
-Bosch/ID 1000cc injectors
-Hasport solid mounts.
-T1 racedevelopment catch can.
-PWR Radiator
-MSD Digital 6plus, HVC II coil.
Transmission.
-86-89 integra CG cable trans.
-Mounts built by me.
-Tilton flow control valve.
-Clutch masters fx500, DD sintered iron disc.
-DSS 3.9 axles.
Turbo Sh*t.
-AFI Turbo forward facing turbo mani
-Precision 6262sp
-Tial MVR
-Tial 50mm BOV
-Garrett 800hp IC core, end tanks fabbed by me.
-3'' IC piping fabbed by me.
-Custom Down pipe built by me. (haha)
Suspension.
-Omni Power drag coilovers.
-skunk2 front camber kit
-ETD racing traction bars
I know i'm forgetting a bunch of stuff. Now some more pics.
Figured I'd post some pics of my car, and a bit about my build. I've been on DSO for many years, just read more than anything. SO finally, here's my car. 1992 cx hatchback.
Here was the car back in 08, after getting in back together after it had been stolen and stripped in 07.
First turbo set-up.
I took the car apart in april 09 to get moving on an engine build i had been working on. And it's sat since. Slowly being built. BUT I have just about everything needed to get the car on the dyno at the first of the new year
Sooo, some specs.
Engine.
-GoldenEagle sleeved and o-ringed d16z6 block.
-Wiseco pistons and eagle rods
-Honda OEM bearings
-Bottom end assembled by Cortney Green
-Port and polished Cyl head
-Crower springs and retainers.
-Comp 59300 cam
-ARP head studs
-OEM honda head gasket.
-GoldenEagle intake mani
-GE Fuel rail
-Omni Power 70mm TB
-FuelLab FPR
-Intank walbro255
-Inline Bosch 044
-Bosch/ID 1000cc injectors
-Hasport solid mounts.
-T1 racedevelopment catch can.
-PWR Radiator
-MSD Digital 6plus, HVC II coil.
Transmission.
-86-89 integra CG cable trans.
-Mounts built by me.
-Tilton flow control valve.
-Clutch masters fx500, DD sintered iron disc.
-DSS 3.9 axles.
Turbo Sh*t.
-AFI Turbo forward facing turbo mani
-Precision 6262sp
-Tial MVR
-Tial 50mm BOV
-Garrett 800hp IC core, end tanks fabbed by me.
-3'' IC piping fabbed by me.
-Custom Down pipe built by me. (haha)
Suspension.
-Omni Power drag coilovers.
-skunk2 front camber kit
-ETD racing traction bars
I know i'm forgetting a bunch of stuff. Now some more pics.