As you may have noticed, the control unit is upside down at this point. all you need to do is flip it over and position the cables as needed.
To mount the unit use the stock eg screw hole mounts and drill a small hole in each side of the cross brace on the CRX console as pictured. The hole needs to be as close to the backside of the brace. (yes I know mine is all bent to shit lol )
This is a view from the underside. Here you can see the cables and also note the brace I added to the bottom. This is a simple radio backstrap and really helps the stability.
Thats it! You may need to adjust the unit before final assembly but it came out pretty good imo. The only downside I see is the lower slide controls are a bit close to the dash trim but its very functional, full range of hot and cold are reached and this could easily be done in under an hour.
